EXTREMELY WEATHER RESISTANT: Sun, rain, snow and ice
will not affect any part of the table. (Naturally it is better to cover the table when not in use to keep it clean and prolong the life).

LOW MAINTENANCE: An occasional coat of wax on the fiber glass fascias will enhance the appearance and prolong the luster.
The playing surface can be easily cleaned with mild soap and water.

HIGH DURABILITY: A fiberglass PULTRUSION material with a special UV additive is used for the construction of the chassis
 and the fascias. The legs are rotationally molded with UV thermoset polyethylene and then filled with high density, (20 lb)
cast in place, resin foam. Electrostatic powder coated stainless steel and die cast aluminum parts are used for the corners of the table.

EASY TO SET UP: Simply attach the two legs to the chassis (3 bolts per leg) and roll the table over into the upright position.
Threaded feet are used on the legs to allow for ease of "fine tune" leveling. It only requires 15 to 20 minutes and you're ready to play.

THE PLAYING SURFACE: (Green Fabric)
1) We use a marine grade (Hi-UV Olefin ;Polypropylene) fabric which is highly resistant to weather extremes, tears, fading,
mildew and rot.
2) Our table plays the same as a regular table. Professional pool players have used our table and report that they can make
the same type of shots with similar english and ball movement as found on a felt covered table.
3) Size 3 1/2' X 7' (Bar Room Size) is in compliance with the World Billiard Congress of America standards.

CHASSIS & BED: (The part of the table that the fabric covers)
1) 5/8" high-impact, high-density, fiber cement substrate that will not warp, buckle, or twist. It is the same material that is
 commonly used for exterior building applications.
2) The chassis is constructed of seven fiberglass PULTRUSION cross members adhesively welded to two fiberglass side rails.
 This gives the table proper support, stability and uniform strength.
3) The fiber cement substrate is secured to the chassis with 18" stainless steel bolts and a special waterproof polygrip adhesive.

RAILS:
1) We use Dupont Neoprene profile molded rubber that is bonded to hardwood supports and then thru-bolted to the chassis.
 Dark Green
2) Our rails are designed in such a way to eliminate, or certainly minimize, the tendency of the balls to fly off the table

Coin op available: Add $500.00